Sharp LC-37HV4M Service Manual page 15

• Handling Precautions for LCD Panel
1. Work in a clean room. (Humidity above 50%)
2. Operators should wear an earthing band.
3. Do not give a shock such as falling and vibration.
4. Use the ionizer. (Within 30 cm)
21.Remove the six LCD panel fixing screws and take off the LCD panel unit.
22.Remove the three sheet angle fixing screws, and take off the sheet angle.
23.Take off the reflection/deflection sheet, prism sheet, diffusion sheet and diffusion panel.
24.Remove the three lamp holders (top & bottom) fixing screws each, and take off the lamp holders (top & bottom).
25.Take off the lamp assembly from the lamp clip.
21
Sheet angle
22
LCD panel unit
Lamp holder (bottom)
Lamp holder (top)
24
23
Diffusion panel
22
Sheet angle
22
Lamp assembly (7 sets)
25
24
Diffusion sheet
Prism sheet
Reflection/deflection sheet
22
Sheet angle
15
LC-37HV4M
LC-37HV4H
21
LCD panel unit (front)
Reflection panel
Lamp holder (bottom)
Lamp holder (top)