Sharp LC-20S5H Service Manual page 19

(4) VOLUME FIXED LEVEL
Selection Adjustment from 1 to 60 (no loop)
Default 10
Explanation The sound volume to be fixed by
Limit in Setting None
Exception None
Remarks Setting is valid only when
This must be confirmed actually by changing also the sound volume in accordance with setting.
(5) R/C BUTTON
Selection Selection between
Default Respond
Explanation Keys acceptable by remote control are limited or reception of keys can be prohibited.
1In
"
Limit in Setting limited
sensor) are accepted.
2In
"
No respond
Exception » Adjustment process, factory setting, inspection process and hotel only keys are valid irrespective of set-
ting.
» All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting.
» All the keys can be used also in the initial EZ-Setup after power-ON irrespective of setting.
Remarks
(6) PANEL BUTTON
Selection Selection between
Default Respond
Explanation All the operations by keys (except the power key) of the unit can be invalidated.
Limit in Setting
Exception » Inspection mode and hotel menu mode can be started irrespective of setting.
» All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting.
» In U.S.A model, all the keys can be used also in the initial EZ-Setup after power-ON irrespective of
setting.
Remarks
(7) MENU BUTTON
Selection Selection between
Default Respond
"
Explanation In No respond
unit are invalidated.
Limit in Setting » ON-timer (Wakeup Timer) is turned OFF.
The following keys become invalid.
»
Wake-up timer and clock setting keys and all of the direct change keys to menu display
Exception » Inspection mode and hotel menu mode can be started irrespective of setting.
» All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting.
All the keys can be used also in the initial EZ-Setup after power-ON irrespective of setting.
»
Remarks
"
Volume fixed
" "
Volume fixed is selected for
" " " "
Respond , Limited and
setting, only power ON/OFF, sound volume '", tuning '" and BACKLIGHT (brightness
"
"
setting, all the keys (including the power key) are not accepted.
" " "
Respond and No respond
" " "
Respond and No respond
"
setting, the menu operation by the menu key of the remote control and the menu key of the
19
"
is determined.
" "
fixed .
" "
No respond (loop provide)
"
(loop provide)
"
(loop provide)
LC-20S5H/M/X