Lenovo F0B2 [C20-30] Hardware Maintenance Manual page 51

Step 11. To install the new LED panel module:
a. Attach the panel bracket to the LED panel with the two screws.
b. Line up the panel assembly with the front bezel, then place the panel into position.
c. Secure the new panel to the front bezel with the four screws and pins.
d. Attach the LVDS-camera and converter cables to the connectors on the new LED panel.
e. Attach the converter bracket to the front bezel.
f. Attach the converter board to the bracket.
g. Attach the camera to the new LED panel.
Step 12. Reattach the rear cover.
.
Chapter 7 Replacing hardware
45