Function Indicator Symbols - Telefunken TVCR-210 Service Manual

Note:
The following symbols will appear on the indicator panel to indicate the current mode or operation of the VCR.
On-screen modes will also be momentarily displayed on the tv screen when you press the operation buttons.
Display panel
[ TVCR-210(C) ]
MODE
STANDBY
FUNCTION
TAPE IN
TIMER
REC
When reel or capstan mechanism is not
functioning correctly
When tape loading mechanism is not func-
tioning correctly
When cassette loading mechanism is not
functioning correctly
When the drum is not working properly
P-ON Power safety detection

FUNCTION INDICATOR SYMBOLS

STANDBY FUNCTION
Always " H " during electricity
Power on = " H "
Power off = " L "
Cassette in = " H "
Cassette out = " L "
Timer stand by = " H "
One touch recording = " H "
Timer recording = " H "
General mode = " L "
REC mode = " H "
REC pause
General mode = " L "
"A R" is displayed on a TV screen. (Refer to Fig. 1.)
"A T" is displayed on a TV screen. (Refer to Fig. 2.)
"A C" is displayed on a TV screen. (Refer to Fig. 3.)
"A D" is displayed on a TV screen. (Refer to Fig. 4.)
"A P" is displayed on a TV screen. (Refer to Fig. 5.)
TAPE IN TIMER
" H "= LED Light on, " L "= LED Light off
INDICATOR ACTIVE
1-7-7
REC
Blinks at 0.8Hz interval
HG2E0FIS