Canon PowerShot A 1000 IS User Manual page 19

Setting the Date and Time
Changing the Date and Time
You can change the date and time as needed.
Display the menus.
Press the
8
button.
Select [Date/Time] in the
4fT
tab.
Press the
~
.. buttons to select the
4fT
tab.
Press the ....... buttons to select [Date!
Time], then press the
@
button.
I
: ; Change the date and time.
Follow Steps 2 and 3 on the left page to
change the date and time.
To close the menus, press the
e
button.
"/ , Set the correct date and time. If you have not set the date and time, the Datel
Time menu will appear each time you turn on the camera.
,~ If you removed the batteries from the camera, it is possible that the DatelTime
settings are deleted after approximately 3 weeks. If this occurs, set the date and
time again.
19