Applications > Motion Detection - Vivotek IB8367 User Manual

VIVOTEK
Applications > Motion detection
This section explains how to configure the Network Camera to enable motion detection. A total
of three motion detection windows can be configured.
hallway
Follow the steps below to enable motion detection:
Follow the steps below to enable motion detection:
1. Click New to add a new motion detection window.
2. In the Window Name text box, enter a name for the motion detection window.
■ To move and resize the window, drag it to a preferred location, and let cursor stay on the edge of the
window until it changes into the resize cursor.
■ To delete a window, click the X mark on the upper right corner of the window.
3. Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving the
Sensitivity and Percentage slider bar.
4. Click Save to enable the settings.
5. Select Enable motion detection to enable this function.
For example:
Video(TCP-AV)
The Percentage Indicator will rise or fall depending on the variation between sequential images. When
motions are detected by the Network Camera and are considered to exceed the preset threshold, the
red bar rises. Meanwhile, the motion detection window will be outlined in red. Photos or videos can be
captured instantly and configured to be sent to a remote server (via an Email or FTP server). For more
information on how to configure an event setting, please refer to Event settings on page 104.
118 - User's Manual
2010/12/10 17:08:56
2014/07/20
2014/07/20
2010/12/10 17:08:56
hallway
Motion Detection Setting 1:
For normal situations
Motion Detection Setting 2:
For special situations