Sanyo C29LF41 Service Manual page 14

Service Adjustments
Service Adjustment-2 (MTS Adjustment)
Following table shows the initial values of MTS Adjustment which have been stored in the CPU ROM.
No. Item
01 INPUT LEVEL
02 HIGH SEPARATION
03 LOW SEPARATION
1. Enter the Service Menu
While pressing the MENU button on the televi-
sion, press the Number Key 3 on the remote control
unit. The Service Menu now appear.
[ MTS Adjustment Mode ]
2. Service Adjustments:
Press the CHANNEL UP/DOWN button on the remote
control handset to select the desired service menu
item you want to adjust.
Use the VOLUME + / - button to adjust the data. The
+ or - button will increase or decrease the data
sequentially.
3. Exit from the Service Menu
Press the MENU button to turn off the Service Menu
display.
The data which is set in the service mode is stored
into the memory IC automatically.
Initial value Range
08 00~15
21 00~63
34 00~63
[ Entering the Service Menu ]
VOLUME -
[ Exit from the Service Menu ]
-14-
MENU
CHANNEL UP
CHANNEL DOWN
[ Service Adjustment ]
VOLUME +