System Functions - Quick Reference - DSC LCD5511 Instruction Manual

System Functions - Quick Reference

The following chart lists the basic functions of your system and the keys to press for each function.
NOTE: Some functions may not be available on your system. Ask your installer for more information.
To do this:
Arm system (Away):
Arm system (Quick):
Arm system (Stay):
Arm system (No Entry Delay):
Bypass zones:
Disarm system:
Exit premises when system
armed:
Reset smoke detectors:
Program access codes:
Send Fire message:
Send Auxiliary message:
Send Panic message:
Set system time and date:
Silence alarm:
Turn auto-arm on/off:
Turn door chime on/off:
Turn on bypassed zones (if Stay
armed):
View alarm memory:
View troubles:
Press this:
[access code], leave through entry/exit door OR press
hold for 2 seconds (if enabled)
(from Ready state)
[Access Code], do not exit premises OR press
seconds(if enabled)
[Access Code]
[2-digit zone number(s)],
[Access Code]
Refer to "Programming Access Codes" in the Instruction Manual
(press and hold both keys simultaneously for 2 seconds)
(press and hold both keys simultaneously for 2 seconds)
(press and hold both keys simultaneously for 2 seconds)
[Master Code]
mat: 00:00-23:59) and date (month/day/year) as 10 digits:
[hh:mm MMDDYY]
[Access Code]
[master code]
to toggle on or off OR press
(if enabled)
(Troubles indicated by numbers 1-8 on top of keypad dis-
play. See 'Viewing Trouble Conditions' in Instruction Manual for list
of trouble definitions)
and hold for 2
# to exit
, enter current time (24-hr for-
for 2 seconds
and