Ejecting Memory Cards; Changing Print Setting - Epson Stylus CX6600 Operation Manual

Note:
If the memory card is inserted incorrectly, the memory card light does not
go on.
5. If the images are stored on the memory card, the following message
appears. Press the D or OK button.
A
C

Ejecting memory cards

1. Make sure all the printing job is finished and the memory card light
is not flashing.
2. Open the memory card slot cover.
3. Eject the memory card by pulling it out straight from the slot.
Caution:
c
❏
❏

Changing Print Setting

You can change the print setting when the LCD panel is in the state
shown below.
A
C
Found Images...
Total XXX
Do not remove the memory card or turn off the product while the
printing or while the memory card light is flashing. Data on the
memory card may be lost.
If you are using this product with a computer which has Windows
2000 or XP installed, never turn this product off or disconnect the
USB cable with a memory card inserted in this product; this may
destroy data on the memory card. See the Reference Guide for detail.
Plain
B-Free
Printing Directly from a Memory Card
B
OK
D
B
A4
XXX
D
37