Mechanical Spec - Sharp 190TW8FB Service Manual

190TW8 TV 86
10. Mechanical Specification
Weight
Height
Depth
Physical
Dimension Net Weight
Gross Weight
Units per Pallet
Pallet Dimension
40' Container
Loading
Packing
Specification
Carton Label
Display Head
Neck / Base
Internal Plastic
Cabinet Color
Drift
Cabinet
Material
Cabinet Texture
Bezel
Gap
Bezel / Speaker
Specification
Cover
Ergonomics
Screen Printed
Parts
Front Panel
Buttons
Button Alignment
Surface Quality
Fade and Color
Others
change
A surface
B surface
Cosmetic
Criteria for
Molded Plastic
C surface
Vibration
Vibration Test
Frequency :
Acceleration :
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
ABS UL94HB
ABS UL94HB
ABS UL94HB
The color drift due to UV-Light shall be less than 3.0 "Delta E"
in the 1976 CIE L*a*b colorspace. Testing shall be performed
according to the requirements of ASTM Test Method D4459-
93.
Mold-Tech # 11010 used on all external textured
surfaces.
The max. gap to the panel glass shall be less than 1.0 mm
The max gap between the bottom of the front bezel and
the top of the speaker cover shall be less than 1.2 mm. The
gap deviation must be less than 0.3mm
Tilt Down 0º up to 1º
Artwork : TBD
Tactile
The gap clearance between the buttons and the bezel
surface shall be uniform
Surface color, gloss, texture, blemishes, and all other
irregularities in the plastic shall comply with TVIs approval
sheet.
All external surfaces shall be sufficiently rugged to withstand
normal operator usage without extreme visible deterioration
in color.
No defects such as knit lines, parting line, defects in texture,
gate marks, flash, sinks etc. should be visible from a distance
of 18 inches.
Defects such as knit lines, parting line, defects in texture,
gate marks, flash, sinks etc. should be visible from a distance
of 30 inches.
Unacceptable defects are limited to voids or breaks in the
plastic or gross mold distortions.
1 – 200 Hz
1.14 G RMS