DSC PTK5507 Installation Instructions Manual

DSC PTK5507 Installation Instructions Manual

V1.0 power series
Hide thumbs Also See for PTK5507:

Advertisement

PTK5507 v1.0
Installation Instructions
alarm shop
WARNING: Please refer to the System Installation Manual for information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer.
NOTE:
T
hese instructions shall be used in conjunction with the system Installation Manual of the Control Panel with which this equipment is intended to be used.

Advertisement

Table of Contents
loading

Summary of Contents for DSC PTK5507

  • Page 1 PTK5507 v1.0 Installation Instructions alarm shop WARNING: Please refer to the System Installation Manual for information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. NOTE: hese instructions shall be used in conjunction with the system Installation Manual of the Control Panel with which this equipment is intended to be used.
  • Page 2: Specifications

    The PTK5507 keypad can be used on security systems with the keypad. up to 64 zones. These keypads are compatible with the lat- Mount and Wire Keypad...
  • Page 3: Programming/Enrolling Keypad

    LCD keypads. Per- Figure 4 - Wiring will stop sending out the status and the keypad status will be form the following procedure in order to broadcast labels: PTK5507 inaccurate. Step 1 - Program one LCD keypad completely. Enrolling the Keypad NOT USED Step 2 - Make sure all LCD keypads are connected to the Keybus.
  • Page 4: Keypad Programming

    2. Enable/disable the desired Fire, Auxiliary and Panic buttons. ex. For Zone 1 enter section [001], for Zone 2 enter section [002] etc. Default: “Zone 1”-“Zone 64” NOTE: The Fire, Auxiliary and Panic buttons are enabled by default on the PTK5507. Label...
  • Page 5 [101]-[108] Partition Labels ex. For Partition 1 enter section [101], for Partition 2 enter section [102] etc. Section Partition Label [101] I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I 1 to 8 I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I _ _ _ _ _ I [108]...
  • Page 6: Alarm Shop

    EULA are reserved by DSC and its suppliers. EULA, DSC is unwilling to license the Software Product to You, and You have no right to use it. 4. EXPORT RESTRICTIONS - You agree that You will not export or re-export the SOFTWARE PRODUCT LICENSE SOFTWARE PRODUCT to any country, person, or entity subject to Canadian export restrictions.
  • Page 7 SOFTWARE PRODUCT to fail to perform as expected. ©2012 Tyco International Ltd. and its Respective Companies. All Rights Reserved. Toronto, Canada • www.dsc.com • Tech Support: 1-800-387-3630 (Canada, US), 905-760-3000 Printed in Canada...
  • Page 8 Notes alarm shop...

Table of Contents