Chapter 8 Trouble Shooting; Normal Phenomena - Haier BD-379GAA Service Manual

SERVICE MANUAL
Model: BD-379GAA

Chapter 8 Trouble shooting

8-1. Normal phenomena

Problem
Freezer does not Temperature control in OFF or
operate or Min or 0 position.
Power-On Light is
Freezer is unplugged.
not on
The fuse is blown/circuit
breaker is tripped.
Freezer
Door/lid left open.
starts/stops too
frequently
Too frequent or too long to
door/lid openings.
Temperature control set too
cold.
Freezer operates Door/lid left open.
too long
Too frequent or too long
door/lid openings.
Temperature control set too
cold.
Inadequate air circulation
space around cabinet.
Fast Freeze switch is in the
ON position (on some
models)
Noisy operation or Floor may be weak, causing
cabinet vibrates freezer to vibrate when
compressor is on.
Cabinet is not positioned
solidly on floor
Freezer
Door/lid left open.
temperature too
warm
Too frequent or too long
door/lid openings.
Temperature control OFF or
Foods defrosting Min or 0 positions.
Possible Causes
Issue 2009-12-14
Rev.
What To Do
Move the control to a temperature setting.
Push the plug completely into the outlet.
Replace fuse or reset the breaker
Check to see if package is holding door/lid
open.
See About the operation of the freezer
Check to see if package is holding door/lid
open.
See About the operation of the freezer
See Preparing to install the freezer
See About the operation of the freezer
Placing 2 X 4s (51 mm X 102 mm) under the
length of the freezer will help support it and
may reduce vibration.
See Preparing to install the freezer Or use
shims for uneven floor
Check to see if package is holding door/lid
open.
Move the control to a temperature setting.
Ref0912S018V0
16