Level 1 and 2 Service Manual
6809495A75-O
5.
Use the disassembly tool to lift the side of the antenna out of the phone (see
Figure 9).
Figure 9. Removing and Replacing the Antenna
6.
Carefully remove the antenna from the phone.
7.
To replace, insert the antenna into the antenna slot on the phone. Ensure the
antenna makes contact with the RF contacts on the PC board.
8.
Align the antenna cover over the antenna.
9.
Place the curved edge of the antenna cover onto the phone.
10. Carefully press the straight edge of the antenna cover into place until the
latches snap into place.
11. Insert the RF grommet fully into the opening on the antenna cover.
12. Reassemble the SIM, battery, and battery cover as described in the procedures.
October 14, 2005
Antenna assembly
Disassembly tool
Disassembly
RF contacts
o
21