Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
THE METHOD OF ATTACHMENT OF FP-380 FLEXIBLE BOARD
Fold dotted line parts of the FP-380 flexible board
1
as shown in figure.
Adhesive tape
2 Hang it on the claw after putting the FP-380
flexible board on the hinge cover (M).
Adhesive tape
DCR-HC36/HC36E_L2
Fold
Hinge cover (M)
Claw
HELP
3 Roll the
Fold
Adhesive tape
4 Attach two hinge covers as shown in figure.
the FP-380 flexible board 90 degrees.
Claw
Claw
Claw
HELP