Activating The Bluetooth Signal; Pairing With A Cellphone; Searching From This Unit - Sony nav-u Quick Start Manual

Activating the Bluetooth signal
1
In the menu display, touch.
iii!,
then "Bluetooth."
2
Select "Bluetooth Signal;' then "ON."
The signal is activated.
The Bluetooth indicator lights up in blue.
Pairing with a cellphone
Pairing is required only the first time you connect to a cellphone.
To pair this unit to a cellphone, you need to enter the same passkey* on this unit and on the
cellphone. The passkey can be either your own selected number or the number determined by the
cellphone.
For details, see the manual of the cellphone.
*
Passkey may be cal/ed "passcode," "PIN code," "PIN number," "password," etc., depending on the
eel/phone.
Searching from this unit
The procedure to search for a cellphone from this unit is explained below.
Check that the cellphone is set to allow for searching (discoverable) beforehand.
1
In the menu display, touch ......." then "Bluetooth."
2
Select"Add Devices."
A message asking you to set the cellphone to discoverable appears.
3
Select "OK."
After search is complete, the list of detected devices appears.
To list devices by address, select "Address."
To list by name, select "Name."*
*
The address appears instead of the name if unavailable.
4
Select the cellphone to register.
Pairing starts.
5
Enter the passkey.
Perform the required operation also on the cellphone.
A message appears stating that the pairing is complete.
continue to next page
~
43