Panasonic KX-NS1000 Installation Manual page 158

5.6.3 Programming the Network Settings
158 Installation Manual
Confirm that all V-IPGW16 cards are set to OUS.
Note
When a V-IPGW16 card is installed, 8 ports are
available for the card.
2. a. Click Setup ® PBX Configuration ® CO &
Incoming Call.
b.
Click CO Line Settings.
c.
Type the CO Name and assign an unused Trunk
Group Number to be used for all IP trunks.
d.
Click OK.
3. a. Click Setup ® PBX Configuration ® System.
b.
Click Numbering Plan.
c.
Click Main.
d.
Click the Other PBX Extension tab.
e.
In the Dial (3 digits) cell, type a starting digit of
destination extension.
f.
Click OK.
4. a. Click Setup ® PBX Configuration ® Private
Network.
b.
Click TIE Table.
c.
In the Leading Number cell, type the starting digit
of destination extension.
d.
Click OK.