Head Restraints - Chevrolet Silverado 2015 Getting To Know Manual

Seat Adjustments
A
B
Set Memory Positions
Set Exit Position
1. Adjust the driver's seat and adjustable pedals
2. Press and release the SET button and then press and hold the
driver's door until a beep sounds.
Recall Positions
With the vehicle in Park and the ignition on, press and release button 1 or 2 or the
Exit button to recall the stored position.
At any time, press and hold button 1 or 2 on the driver's door until the stored position is
reached. Releasing the button before the stored position is reached cancels the recall.
Note: To change the memory recall and exit settings, go to Comfort and Convenience in the Vehicle
Settings menu.
To raise the head restraint, pull the head restraint up.
To lower the head restraint, press the button on top of the seatback and push the head
restraint down.
F Optional equipment
C
A. Seat Cushion Adjustment
Move the front horizontal control to move
the seat forward or rearward, or to tilt, raise
or lower the seat.
B. Seatback Adjustment
Move the vertical control to recline or raise
the seatback.
C. Lumbar Adjustment
Move the rear control to adjust the lumbar
support.
1. With the vehicle in Park, adjust the driver's
seat, power outside mirrors and adjustable
pedals to the desired positions.
F
2. Press and release the SET button and then
press and hold button 1 on the driver's
door until a beep sounds.
3. Repeat the steps using button 2 for a
second driver.
to the desired positions.
F
See Seats and Restraints in your Owner Manual.

HEAD RESTRAINTS

See Seats and Restraints in your Owner Manual.
POWER SEATS
Exit button on the
F
5