Hookups And Settings; Step 1: Connecting To Your Tv - Sony DVP-NS518P Operating Instructions Manual

Hookups and Settings

When unpacking, check the supplied accessories by referring to page 40.
b
• Plug cables securely to prevent unwanted noise.
• Refer to the operating instructions supplied with the components to be connected.
• Be sure to disconnect the mains lead of each component before connecting.

Step 1: Connecting to Your TV

Connect this player to your TV using a video cable. Select pattern A or B, according to the
input jack on your TV.
INPUT
A
VIDEO
L
AUDIO
R
TV
to COMPONENT
VIDEO OUT
l : Signal flow
Video input jack
A
You will enjoy standard quality images.
Component video input jacks
B
(Y, P /C , P
B B R
You will enjoy accurate colour reproduction
and high quality images.
10
(yellow)
Audio/video cable (supplied)
(white)
(red)
(green)
Component video
cable (not supplied)
/C )
R
(red) (white) (yellow)
to LINE OUT (VIDEO)
(blue) (red)
When connecting to a standard 4:3 screen TV
Some images may not fit your TV screen. To
change the picture size, see page 29.
b
Do not connect a VCR, etc., between your TV and
the player. If you pass the player signals via the
VCR, you may not receive a clear image on the TV
screen. If your TV has only one audio/video input
jack, connect the player to this jack.
CD/DVD player
COMPONENT
B
VIDEO IN
Y
(green)
P /C
B B
(blue)
P /C
R R
(red)
TV