Table of Contents
Advertisement
Available languages
Available languages
Controls and Features (cont.)
Control Panel (Cont.)
LAMP
¢
7
Use this button to select a device such as a video deck
connected to the AV IN terminal of the projector. Each time
you press the button, the device selected changes as
follows:
Y/C
8
Use this button to select a device connected to the
COMPUTER -1 or -2 terminals. Each time you press the
button, the selection changes as follows:
COMP 1
9
Use this button to call up the setting menu. For details,
refer to "Making Basic Settings" on page 32.
10
+
3
-
2
p
QUICK ALIGN. button
1
While a menu screen is shown, use this button to adjust
2
the values for the item selected. When no menu is shown,
the quick alignment function works.
3
• When a menu is shown
+ 3 button: The value for the selected item increases.
- 2 button: The value for the selected item decreases.
4
• When no menu is shown
5
Press the + 3 button and - 2 button at the same time:
QUICK-ALIGNMENT is displayed on the screen and the
6
quick alignment function works (TRACKING, PHASE, H.
POS. and V. POS. are automatically adjusted). When the
7
adjustment is finished, the display goes off automatically.
8
Memo
The quick alignment function :
• Works for computer input (COMPUTER- 1 and - 2 input terminals)
9
signals.
• Does not work for video input (AV IN input terminal) signals.
CAUTION
p
• Automatic adjustment with the quick alignment function
should be done on a bright still-picture screen. This function
may not work correctly on a dark screen or motion-picture
screen. If adjustment with this function is not satisfactory,
adjust TRACKING, PHASE, H. POS. and V. POS. manually
(see pages 32, 38 and 39).
COMP 2
Advertisement
Chapters
Table of Contents
