Pioneer DEH-P90DAB Service Manual page 78

DEH-P90DAB
(4) Operation status display during setup
Status No. Description
00 CD + 5 V ON is being processed.
01 SERVO LSI is being initialized (1/3).
02 CRAM of servo LSI is being initialized.
03 SERVO LSI is being initialized (2/3).
04 Offset is being adjusted (1/3).
05 Offset is being adjusted (2/3).
06 Offset is being adjusted (3/3).
07 FZD is being adjusted.
08 Servo LSI is being initialized (3/3).
10,11 Carriage Home processing start.
12 Carriage is moving toward the inside
circumference.
13 Carriage is moving toward the outside
circumference.
14 Carriage outer kicking.
15 Carriage is being sent to the outside
circumference. (for one second)
20 Servo Close processing start.
21 Being processed before Focus Search
start.
22 Spindle rotation, Focus Search start.
23 Focus Close (FOON = Low) wait.
24 Waiting after Focus Close.
25 Being processed before Focus Search
start, at setup protection.
26 Being processed before Focus Search
start, at fast recovery.
27 RF detection. (RFOK = Hi confirmation) Focus slips off, no RF is output.
28 Spindle OLV rough servocontrol.
29 Setting before T balance adjustment
processing start.
30 T balance adjustment (1/2).
31 T balance adjustment (2/2).
32 Spindle CLV stationary servocontrol.
33 Tracking Close processing (1/2).
34 Tracking Close processing (2/2).
35 Setting before Focus/Tracking AGC
start.
36 Focus AGC start processing.
37 Focus AGC processing (1/2).
38 Focus AGC processing (2/2).
39 Setting before Tracking AGC start.
78
Protection operation
None
None
None
None
None
None
None
None
None
None
Timeout for ten seconds, defective Home SW.
Timeout for ten seconds, defective Home SW.
None
None
None
None
None
Focus Search timeout.
None
None
None
Focus slips off.
Focus slips off.
Focus slips off.
Focus slips off.
Focus slips off.
Focus slips off.
Focus slips off.
Focus slips off.
Focus slips off.
Focus slips off.
Focus slips off.
Focus slips off.