Picture Adjustment Menu; Sound Adjustment Menu - Sony KDL-26P2520 Service Manual

Picture Adjustment menu

Picture Adjustment
Picture Mode Custom
Backlight 5
Contrast Max
Brightness 50
Colour
50
Hue 0
Sharpness 15
Colour Tone
Warm
Reset
Noise Reduction Auto
Back: Select: Exit:
Enter: MENU
Picture Mode Selects the picture mode.
• "Vivid": For enhanced picture contrast and sharpness.
• "Standard": For standard picture. Recommended for home entertainment.
• "Custom": Allows you to store your preferred settings.
Backlight
Adjusts the brightness of the backlight.
Contrast
Increases or decreases picture contrast.
Brightness
Brightens or darkens the picture.
Colour
Increases or decreases colour intensity.
Hue
Increases or decreases the green tones.
Tip
"Hue" can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes).
Sharpness Sharpens or softens the picture.
Colour Tone Adjusts the whiteness of the picture.
• "Cool": Gives the white colours a blue tint.
• "Neutral": Gives the white colours a neutral tint.
• "Warm": Gives the white colours a red tint.
Tip
"Warm" can only be selected when you set "Picture Mode" to "Custom".
Reset
Resets all picture settings except "Picture Mode" to the factory settings.
Noise Reduction
Reduces the picture noise (snowy picture) in a weak broadcast signal.
• "Auto": Automatically reduces the picture noise.
• "High/Mid/Low": Modifies the effect of the noise reduction.
You can select the options listed below on the
Picture menu. To select options in "Settings",
see "Navigating through menus" (page 16).

Sound Adjustment menu

Sound Adjustment
Sound Effect
Standard
Treble 50
Bass 50
Balance
0
Reset
Mono
Dual Sound
Auto Volume On
On
TV Speakers
Back: Select: Enter: Exit:
MENU
Sound Effect
Selects the sound mode.
"
• Standard": Enhances clarity, detail, and sound presence by using "BBE High definition
Sound System."
• "Dynamic": Intensifies clarity and sound presence for better intelligibility and musical
realism by using the "BBE High definition Sound System."
."BBE ViVA": BBE ViVA Sound provides musically accurate natural 3D image with Hi-Fi
sound. The clarity of the sound is improved by BBE while the width depth and height of sound
image are expanded by BBE's proprietary 3D sound process. BBE ViVA Sound is compatible
with all TV programs including news, music, dramas, movies, sports and electronic games.
Treble Adjusts higher-pitched sounds.
Bass
Adjusts lower-pitched sounds.
Balance
Emphasizes left or right speaker balance.
Reset
Resets all the sound settings to the factory settings.
Dual Sound
Selects the sound from the speaker for a stereo or bilingual broadcast.
• "Stereo", "Mono": For a stereo broadcast.
• "A"/"B"/"Mono": For a bilingual broadcast, select "A" for sound channel 1, "B"
for sound channel 2, or "Mono" for a mono channel, if available.
Tip
If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "A" or "B".
Auto Volume Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend
to be louder than programmes).
TV Speakers Turns off the TV speakers e.g. to listen to the sound through external audio
equipment connected to the TV.
• "On": the sound is output from the TV speakers.
• "One Time Off": the TV speakers are temporarily turned off allowing you to listen
to the sound from external audio equipment.
• "Permanent Off": the TV speakers are permanently turned off allowing you to
listen to the sound from external audio equipment.
Tips
• To turn on the TV speakers again, change to on.
• The "One Time Off" option automatically returns to "On" when the TV set is
switched off.
• "Sound Adjustment" options are not available if "One Time Off" or "Permanent
Off" have been selected.
You can select the options listed below on the
Sound menu. To select options in "Settings",
see "Navigating through menus" (page 16).