Contents / Accessories - Kenwood KRF-V5050D Service Manual

KRF-V5050D/V5550D/V6050D/V7050D/X9050D
Contents

CONTENTS / ACCESSORIES .................................. 2

WIRING DIAGRAM .....................................................3
PC BOARD ................................................................ 9
SCHEMATIC DIAGRAM .......................................... 15
Accessories
FM indoor antenna (1)
(T90-0877-05)
Remote control unit (1)
Mdel name vs remote controller
MODEL Destinations
KRF-V5050D
KRF-V5050D-S
KRF-V5050D
KRF-V5050DE
KRF-V5050D-S
KRF-V5550D-S
KRF-V6050D
KRF-V6050D-S
KRF-V6050D
KRF-V7050D
KRF-V7050D-S
KRF-V7050D
KRF-X9050D
KRF-X9050D-S
KRF-X9050D
Cautions
Resetting the Microcomputer
The microcomputer may malfunction (unit cannot be operated,
or shows an erroneous display) if the power cord is unplugged
while the power is ON, or due to some other external factors.
If this happens, execute the following procedure to reset the
microcomputer and return the unit to its normal operating
condition.
2
CONTENTS / ACCESSORIES
AM loop antenna (1)
(T90-0852-05)
Batteries (R6/AA)
Parts number
Y A70-1468-15
MIX A70-1468-15
ET A70-1469-05
E3 A70-1469-05
E2T2 A70-1469-05
MY A70-1507-05
Y A70-1466-15
MIX A70-1466-15
E A70-1467-05
Y A70-1464-15
MIX A70-1464-15
ET A70-1465-05
Y A70-1480-05
MIX A70-1480-05
ET A70-1481-05
EXPLODED VIEW ....................................................34
PARTS LIST..............................................................35
SPECIFICATIONS ....................................................48
*AC plug adaptor (1)
(E03-0115-05)
Remote controller
Model name Battery cover
RC-R0511 A09-1178-08
RC-R0511 A09-1178-08
RC-R0512 A09-1178-08
RC-R0512 A09-1178-08
RC-R0512 A09-1178-08
RC-R0617 A09-1178-08
RC-R0615 A09-1178-08
RC-R0615 A09-1178-08
RC-R0616 A09-1178-08
RC-R0613 A09-1178-08
RC-R0613 A09-1178-08
RC-R0614 A09-1178-08
RC-R0714 A09-1215-08
RC-R0714 A09-1215-08
RC-R0715 A09-1215-08
With the power cord plugged in, turn the POWER key OFF.
Then, while holding down the ON/STANDBY key, press
POWER key.
• Please note that resetting the microcomputer will clear the contents
of the memory and returns the unit to the state it was in when it left
* Use to adapt the plug on the power cord
to the shape of the wall outlet.
(Accessory only for regions where use is
necessary.)