Initial Setup; Auto Tuner Setup; Channel Summary - JVC I'Art Pro AV-48WP74 User Manual

Initial Setup

Auto Tuner Setup

The auto tuner setup function is described on page 20 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the M
To AUTO TUNER SETUP
π †
è
To operate
è
To choose CABLE or AIR
Press the O
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Press the Menu button when finished

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV.
You can add or delete channels from the line-up or prevent any unauthorized viewers from
watching any or all 181 channels.
Press the M
To CHANNEL SUMMARY
π †
è
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an "". You can
delete channels from the scan by removing the "". If any
channels were missed during auto tuner setup and you wish
to add them, you may by placing an "" next to the channel
number.
è
To the SCAN column
π †
Press the O
Press the M
You can block access to a channel by activating the channel lock.
Press the M
To CHANNEL SUMMARY
π †
è
To operate
è
To the Lock Column (
π †
Press the Z
Press the M
28
button
ENU
button to start
K
button
ENU
button to include or delete from scan
K
button when finished
ENU
button
ENU
)
button to lock or unlock that channel
ERO
button when finished
ENU