Table of Contents
Advertisement
LUGGAGE NET
(2/2)
A
4
Fitting the luggage net A
behind the rear bench seat
Inside the vehicle on each side:
– lift the cover 2 to access the upper
mounting ring of the net;
– fix the net strap hook onto the ring;
C
4
B
– in the luggage compartment, it is
essential to fit the lower mounting
strap hook on the net to the anchor-
ing hook 4 identified by the mark-
ing 6 (depending on vehicle, located
under mobile floor B);
– adjust the net strap so that it is taut.
To remove, loosen the straps, press
hook C, keeping it vertical in the ring
shaft to facilitate removal.
5
Marking
A marking on the luggage retaining trim
indicates the location of the ISOFIX
seat rings 5 and luggage net 6.
A marking on the mobile floor indicates
the location of the access flaps of
ISOFIX seat strap 5 and luggage net 6.
The luggage net is designed
to retain a maximum weight
of 10 kg.
Risk of injury.
6
3.39
Advertisement
Chapters
Table of Contents
