DDC Key In Procedure
Note:
1. Every time after replacing the main board, you have to do the DDC key in.
2. If you find the DDC does not conform to the monitor, you have to do the DDC key in.
Equipment Needed
- VG921m Series Monitor
- DDC Card
- PC
- RS232 cable
- VGA Cable or DVI Cable
Step 1 : Select VG921m in Working Model column to show EDID data on left.
Example : VX1935wm ( VG921m follows the same setting procedure )
ViewSonic Corporation
DDC Card (D8330)
RS-232 Cable
27
VGA Cable
Confidential - Do Not Copy
VG921m-2