Polycom SoundPoint IP 650 Quick Start Manual page 3

Attaching the Base Stand
The base stand can be attached to the SoundPoint
Deskmount Method:
Connect all cables.
1
Wallmount Method:
1
On the back of the phone, remove
the wallmount tab located behind
the hookswitch. Reposition it
so that the end tab is facing up.
This will ensure that the handset
remains in place within the cradle
in a wallmount position.
2
Fasten the wallmount unit to wall
using wall anchors (not included).
When wallmount is secured and
all cables are connected, snap the
SoundPoint® IP 650 into place.
SoundPoint
As soon as power is supplied, the
®
SoundPoint IP 650 starts an automated
process of establishing itself on the
network and downloading software and
applications.
Check with your system administrator
if specific configuration is required for
®
SoundPoint IP 650 Quick Start Guide
Align tabs of base
2
stand as shown.
IP 650 Startup
®
®
IP 650 in one of two ways:
your application software or if any errors
appear during the download process.
For further instructions on how to use your
®
new SoundPoint IP 650, consult
the User Guide available from www.
polycom.com.
Snap firmly
3
into place.