6.1 Installing Software for Firmware Update
6.1.1 Outline
The procedure to update the system firmware of the SYS board using the PPP (Point-to-Point Protocol)
and FTP (File Transfer Protocol) is described in this section.
6.1.2 Requirements
The following environment is necessary to update the firmware.
Software Requirements for PC
– Microsoft Windows95/98
– Virtual modem
– FTP Server/ tools (ex. War FTP Daemon)
Use a serial cable for the DTE-DTE connection to connect the PC and SYS board.
(Update cannot be performed with the cable for the DCE-DCE connection)
DTE-DTE connection
1 CD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 CI
Protocol specifications between the PC and SYS board
BAUD RATE
DATA BIT
PARITY
STOP BIT
FLOW CONTROL
ECHO
DP4500/3500 UPDATING THE FIRMWARE
PC
Serial Cable
115200bps
8 BITS
NONE
1 BIT
NONE
OFF
6 - 2
System
board
1 CD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 CI
December 2000 © TOSHIBA TEC