Caster Installation - Soleus Air HCT-D30-A Operating Instructions Manual

CASTER INSTALLATION

1) Remove casters from the bucket.
For the 70 Pint, the four casters can be taken out from the side
of the bucket directly. (Fig. 1)
For the 30 Pint and 45 Pint, the float must be removed first be-
fore taking the casters out. After taking out the casters, the float
must be placed back in the correct position in order for the de-
humidifier to function properly. (Fig. 2)
Fig. 2
2) Tilt the dehumidifier no more than 45⁰ and forcibly insert the casters. Make sure the ring around the caster
is flush against the bottom of the dehumidifier.
CONTROL PANEL & DIGITAL DISPLAY
Bucket Full Clean Filter
LED Indicator LED Indicator
This button does
FILTER
not operate or offer
BUTTON
any function
NOTE: The four casters can be taken
out by removing the float from pushing
the float support slightly outward.
Fan Speed
LED Indicators
FAN
INCREASE/DECREASE
SPEED
BUTTON
Bucket
Float
support
Two holes on the
Float float support
Digital Humidistat
Display
MyHome Mode
LED Indicators
ROOM
HUMIDITY LEVEL
6
4 casters in
plastic bag
packed inside
bucket
Float support
Two axes on the float
NOTE: The two axes on
the float must be inserted
in the holes on the float
support.
Child-Lock
LED Indicator
Timer
LED Indicator
PRESET
TIMER
MODE
BUTTON
BUTTON
Fig. 1
Power On
LED Indicator
POWER
BUTTON