Location Requirement For Sirius Receiver; Installation Procedure - Raymarine SR6 Installation Manual

Sirius receiver/high speed network switch
Table of Contents

Advertisement

4.1 Location requirement for Sirius
receiver
The installation location must take into account the following
requirements:
• Install below decks in a dry area.
• Location must be at least 1 m (3 ft.) away from any magnetic
compass.
• Safe from physical damage and excessive vibration.
• Away from any source of heat.
• Away from any potential flammable hazard, such as fuel vapors.
• Allow a minimum 30 cm (6 in) space below the unit to ensure
adequate space for cable bends and connections.
24

4.2 Installation procedure

1. Use a 7/64" drill bit to pilot holes for the mounting points.
2. Remove the bottom cover. This is secured with 3 screws at the
rear of the unit.
D11912-1
SR6 Sirius Receiver

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents