JVC KM-H2500E Instructions Manual page 47

To save attributes for an image:
1. Modify the attributes for an image as necessary
2. Use the Func knob to save the attributes for that
image. You can choose from the following:
• Save — Saves the currently displayed
attribute. Other saved attributes are not
affected.
• SavAll — Saves all attributes.
To revert to saved attribute values:
3
2
1. Press and hold SHIFT on any bus. If you use the
Program bus or on-air Key bus, you will affect
on-air images.
2. Press MEDIA 1 or MEDIA 2 to select the
Media-Store channel to load the image into.
3. Press NEXT until Attrib is displayed.
4. Use the Func knob to save the attributes for that
image. You can choose from the following:
• Revert — Reverts the currently displayed
attribute to the previously saved value. Other
attributes are not affected.
• RevAll — Reverts all attributes to previously
saved values.
2
4
1
41