Panel Replacement; Board Replacement; Ae Board Replacement; Be Board Replacement - Sony KDL-32V2000 Service Manual

25. Send ECS COLOR_SAVE command.
26. Set up COLOR_TEMP=3.
27. Write the correct values for R_DRV, B_DRV, R_BKG and B_BKG
from the table below.
COLOR_TEMP=3 (WARM2)
R_DRV B_DRV
32" 265 189
40" 260 198
46" TBD TBD
28. Send ECS COLOR_SAVE command.
29. Switch the TV set OFF and then ON again to retain adjustment
values.

3-5. Panel Replacement

When replacing the panel please reset the gamma and white balance
before performing W/B (See page 27, 3-4) for new panel.

3-6. Board Replacement

3-6-1. AE Board Replacement

When replacing the 'AE' board please readjust the AD (See page 25,
3-2) and readjust the W/B (See page 27, 3-4).

3-6-2. BE Board Replacement

When replacing the 'BE' board please readjust the AD (See page 25,
3-2) and readjust the W/B (See page 27, 3-4).
Note :
In the event of a 'BE' board being re-used in service please
ensure that the Serial number is cleared in the NVM.
R_BKG B_BKG
509 516
511 500
TBD TBD
- 29 -
WAX2
RM-ED005