Settings For Display Video On Hdmi - Toshiba Satellite A500 User Manual

When connecting or disconnecting an HDMI device to or from the
computer, only do so when the computer is turned on or when the
computer is completely turned off. Do not do so when the computer is in
Sleep Mode or Hibernation Mode.

Settings for display video on HDMI

To view video on the HDMI device, be sure to configure the following
settings otherwise you may find that nothing is displayed.
■
Be sure to use the FN + F5 HotKey to select the display device before
starting to play video. Do not change the display device while playing
video.
■
Do not change the display device under the following conditions.
■
■
Select HD Format
To select the display mode, follow the steps as detailed below:
1. Click Start and click Control Panel.
2. Click Appearance and Personalization.
3. Click Personalization.
4. Click Display Settings.
5. Click Advanced Settings.
6. Click List All Modes.
7. Select the one of the below selection at "List All Modes".
Display mode at "List All Modes"
1920 by 1080, True Color (32bit), 60Herts
1920 by 1080, True Color (32bit), 30Herts
(Interlaced)
1280 by 720, True Color (32bit), 60Herts
720 by 576, True Color (32bit), 50Herts
720 by 480, True Color (32bit), 60Herts
The above display mode is a typical HDMI display mode. The selectable
display modes will vary for different HDMI monitors.
User's Manual
While data is being read or written.
While communication is being carried out.
Optional Devices
HD Format
1080p
1080i
720p
576p
480p
8-16