Sony STR-DA3300ES Service Manual page 15

Remote commander
You can use the supplied remote RM-AAP018
to operate the receiver and to control the Sony
audio/video components that the remote is
assigned to operate.
RM-AAP018
Name Function
A AV ?/1 (on/
Press to turn on or off the audio/
standby)
video components that the
remote is assigned to operate.
If you press the ?/1 (B) at the
same time, it will turn off the
receiver and other Sony
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
button (C).
B ?/1 (on/
Press to turn the receiver on or
standby) off.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
C Input
Press one of the buttons to
buttons
select the component you want
to use. Press a pink-labeled
button after pressing SHIFT
(wj). When you press any of the
input buttons, the receiver turns
on. The buttons are factory
assigned to control Sony
components. You can program
the remote to control non-Sony
components following the steps
in"Programming the remote".
D TEST TONE Press to output the test tone
from each speaker.
E AMP
Press to enable the receiver
operation.
F MUSIC
Press to select sound field.
G MOVIE
Press to select sound field.
Name Function
H Numeric
Press to
buttons – preset/tune to preset stations.
– select track numbers of the
CD player, DVD player, Blu-
ray Disc Player or MD deck.
Press 0/10 to select track
number 10.
– select channel numbers of
the VCR or satellite tuner.
– After pressing TV (wl),
press the numeric buttons to
select the TV channels.
I ENTER
Press to enter the value after
selecting a channel, disc or
track using the numeric buttons.
MEMORY
Press to store a station during
tuner operation.
J AMP MENU Press to display the menu to
operate the receiver.
K
Press V/v/B/b to select the
menu items. Then press
enter the selection.
V/v/B/b
L OPTIONS
Press to display and select items
from option menus for receiver
and DVD player, Blu-ray Disc
Player.
TOOLS Press to display and select items
from the option menus for DVD
player or Blu-ray Disc Player,
etc.
M MENU
Press to display the menu to
operate the audio/video
components.
SCREEN/ Press SHIFT (wj), then press
DSPL MENU to switch the display
CONTROL mode of the menu between
SCREEN (to display the menu
on the TV screen) and DSPL (to
display the menu in the display
window).
N CATEGORY
Press to select the category for
+/–
satellite tuner.
a)
O m/M
Press to operate the DVD
a)
x player, Blu-ray Disc Player, CD
a)
X player, MD deck, tape deck, or
a) b)
H
component connected to the
a)
./>
DIGITAL MEDIA PORT
adapter etc.
CATEGORY
Press to select the category
MODE mode for satellite tuner.
TUNING +/– Press to select station.
P PRESET
Press to register FM/AM/
b)
+ /–
satellite tuner stations or to
select preset stations.
TV CH +/–
Press TV (wl), then press TV
CH +/– to operate the TV,
satellite tuner, VCR, etc.
Q F1/F2
Press TV (wl), then press F1 or
F2 to select a component to
operate.
• HDD recorder
F1: HDD
F2: DVD player, Blu-ray Disc
Player
• DVD/VHS combo player
F1: DVD player, Blu-ray Disc
Player
F2: VHS
TV/INPUT Press TV/INPUT and TV (wl)
at the same time to select the
input signal (TV input or video
input).
WIDE Press repeatedly to select the
wide picture mode.
RESOLUTION Press SHIFT (wj) then press
RESOLUTION repeatedly to
change the resolution of signals
output from the HDMI OUT or
COMPONENT VIDEO
MONITOR OUT jack.
STR-DA3300ES/DG1100
Name Function
R DVD/
Press to display the menus of
TOP MENU,
the DVD player on the TV
MENU screen. Then use V/v/B/b and
to perform a menu
operations.
NIGHT Press AMP (5), then press
MODE NIGHT MODE to activate the
NIGHT MODE function.
INPUT
Press AMP (5), then press
MODE INPUT MODE to select the
input mode when the same
components are connected to
both digital and analog jacks.
S MUTING
Press to turn off the sound
temporarily. Press the button
again to restore the sound.
T MASTER
Press to adjust the volume level
VOL +/– of all speakers at the same time.
TV VOL +/–
Press TV (wl), then press TV
VOL +/– to adjust the volume
to
level of the TV.
U DISC SKIP
Press to skip a disc when using
a multi-disc changer.
V RETURN/
Press to return to the previous
EXIT O menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
W DISPLAY
Press to select information
displayed in the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or
MD deck.
Note
In the SCREEN mode, press the
button to display the menu on
the TV screen.
X CLEAR
Press to
– clear a mistake when you
press the incorrect numeric
button.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.
>10
Press to select
– track numbers over 10 of the
VCR, satellite tuner, CD
player or MD deck.
– channel numbers of the
Digital CATV terminal.
D.TUNING Press to enter direct tuning
mode.
Y 2CH/
Press to select sound field
A.DIRECT
or to switch the audio of the
selected input to analog
signal without any adjustment.
Z A.F.D.
Press to select sound field.
wj SHIFT Press to light up the button. It
changes the remote button
function to activate the buttons
with pink printing.
wk SLEEP
Press to activate the sleep timer
function and the duration which
the receiver turns off
automatically.
wl TV Press to enable the TV
operation.
e; RM SET UP Press to set up the remote.
a)
See the table for information on the buttons that
you can use to control each component.
b)
The tactile dot is attached to these buttons (H,
PRESET+). Use as a mark of operation.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
15