Novell OES 11 SP2 Installation Manual page 143

When you specify the configuration information for OES services, see the information in
"Configuration Guidelines for OES Services" on page
AFP

 Archive and Version Services
Backup/Storage Management Services (SMS)

 CIFS
 Clustering (NCS)
 DHCP
 DNS
 Domain Services for Windows (DSfW)
 eDirectory
 FTP
 iFolder
 iManager
 iPrint
Linux User Management (LUM)

 NCP Server/Dynamic Storage Technology
 NetStorage
 Pre-Migration Server
 QuickFinder
 Novell Remote Manger (NRM)
 Novell Samba
 Novell Storage Services
When you are satisfied with the settings for each component, click Next.
2
3 When you confirm the OES component configurations, you might receive the following error:
The proposal contains an error that must be resolved before continuing.
If this error is displayed, check the summary list of configured products for any messages
immediately below each product heading. These messages indicate products or services that
need to be configured. If you are running the YaST graphical interface, the messages are red
text. If you are using the YaST text-based interface, they are not red.
For example, if you selected Linux User Management in connection with other OES products or
services, you might see a message similar to the following:
Linux User Management needs to be configured before you can continue or disable
.
the configuration
If you see a message like this, do the following:
On the summary page, click the heading for the component.
3a
Supply the missing information in each configuration page.
3b
When you specify the configuration information for OES services during the upgrade, see
the information in
When you have finished the configuration of that component, you are returned to the Novell
Open Enterprise Server Configuration summary page.
"Configuration Guidelines for OES Services" on page
78, or click a link below:
78.
Upgrading to OES 11 SP2 143