Fine Adjustment Ot The Image Position; For Smart Stack Users - InFocus IN5122 Manual

2.5 Fine adjustment of the image position
To superimpose the images of Main (Projector B) and Sub (Projector A), use
CORNER CORRECTION to finely adjust the image size and position of Main
(Projector B).

For Smart Stack users

1.
Press the MENU button on the remote control or the
control panel on Main (Projector B) to display the
MENU dialog.
Highlight MAIN with the ▲/▼ buttons, and press the ►
button.
The Main (Projector B) menu will appear.
2.
Using the ▲/▼/◄/► buttons on the remote
control or the control panel on Main (Projec-
tor B), select CORNER CORRECTION from
the BASIC MENU, or the SETUP menu of AD-
VANCED MENU.
or
MENU SETUP
The image for Smart Stack appears on
screen. This image includes a RULED LINES
screen with the CORNER CORRECTION
dialog from Main (Projector B) and another
RULED LINES screen from Sub (Projector
A).
3.
Using CORNER CORRECTION on Main
(Projector B), adjust the image size and
position of Main (Projector B) to superimpose
well onto the image of Sub (Projector A).
(User's Manual
menu)
The following is the recommended adjustment
method.
(1) Roughly adjust the four corners in the fol-
lowing order:
Top left → Top right
→ Bottom right → Bottom left
(2) Finely adjust the four corners in the same
order as listed above in Step 1.
• Refer to
NOTE
(User's Manual
menu)
→ BASIC MENU
users. ( 16 )
NOTES for all
→ BASIC
Image from Main (Projector B)
Image from Sub (Projector A)
or SETUP
15
Installation
Main (Projector B)
Superimposed image