D-Link AC750 User Manual page 96

Section 3 - Configuration
Learn NetBIOS
If NetBIOS announcement is switched on, it will cause WINS information to be learned from the WAN side, if available. Turn this
from WAN:
setting off to configure manually.
NetBIOS Scope:
This is an advanced setting and is normally left blank. This allows the configuration of a NetBIOS 'domain' name under which
network hosts operate. This setting has no effect if the 'Learn NetBIOS information from WAN' is activated.
NetBIOS Node:
This field indicates how network hosts are to perform NetBIOS name registration and discovery. H-Node, this indicates a Hybrid-
State of operation. First WINS servers are tried, if any, followed by local network broadcast. This is generally the preferred mode
if you have configured WINS servers. M-Node (default), this indicates a Mixed-Mode of operation. First Broadcast operation is
performed to register hosts and discover other hosts, if broadcast operation fails, WINS servers are tried, if any. This mode favours
broadcast operation which may be preferred if WINS servers are reachable by a slow network link and the majority of network
services such as servers and printers are local to the LAN. P-Node, this indicates to use WINS servers ONLY. This setting is useful
to force all NetBIOS operation to the configured WINS servers. You must have configured at least the primary WINS server IP to
point to a working WINS server. B-Node, this indicates to use local network broadcast ONLY. This setting is useful where there are
no WINS servers available, however, it is preferred you try M-Node operation first. This setting has no effect if the 'Learn NetBIOS
information from WAN' is activated.
WINS IP Address:
Enter your WINS Server IP address(es).
D-Link DIR-816L User Manual 91