Using The Automatic Adjustment Feature; Adjusting The Position - Hitachi CP-D31N User Manual

Operating

Using the automatic adjustment feature

Press the AUTO button on the remote control.
1.
Pressing this button performs the following.
For a computer signal
The vertical position, the horizontal position and the
horizontal phase will be automatically adjusted.
Make sure that the application window is set to its maximum
size prior to attempting to use this feature. A dark picture
may still be incorrectly adjusted. Use a bright picture when
adjusting.
For a video signal and s-video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for
the VIDEO FORMAT item in the INPUT menu (
and horizontal position will be automatically set to the default.
For a component video signal
The vertical position and horizontal position will be automatically set to the
default. The horizontal phase will be automatically adjusted.
● The automatic adjustment operation requires approx. 10 seconds. Also
please note that it may not function correctly with some input.
● When this function is performed for a video signal, a certain extra such as a
line may appear outside a picture.
● When this function is performed for a computer signal, a black frame may be
displayed on the edge of the screen, depending on the PC model.
● The items adjusted by this function may vary when the FINE or DISABLE is
selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu
50).
(

Adjusting the position

Press the POSITION button on the remote control while no
1.
menu is on screen, to display the D-SHIFT (
screen.
Use the ▲, ▼, ◄ and ► buttons to adjust the picture position.
2.
Press the POSITION button again to finish this operation.
● This is a function to shift the position of the shrunken picture by the D-ZOOM
38) function.
(
● When an OSD (On Screen Display) menu is displayed, this operation moves
the position of the OSD menu, but the picture position is not (
● The D-SHIFT adjustment values are not valid when the D-ZOOM is set to 256
(full screen).
22
35). The vertical position
38) dialog on
POSITION button
AUTO button
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
AUTO
ASPECT SEARCH BLANK
PAGE VOLUME
MAGNIFY FREEZE
UP
ON
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
MENU
POSITION
KEYSTONE
MY BUTTON MUTE
1 2
POSITION MENU
ENTER
ESC RESET
26).