Network Settings - Nokia N95 User Manual

Line in use — This setting (network service) is
●
shown only if the SIM card supports two
subscriber numbers, that is, two phone lines.
Select which phone line you want to use for
making calls and sending text messages. Calls on
both lines can be answered irrespective of the
selected line. If you
subscribed to this network service, you are not
able to make calls. When line 2 is selected,
shown in the standby mode.
Tip: To switch between the phone lines,
press and hold # in the standby mode.
Line change — To prevent line selection
●
(network service),
your SIM card. To change this setting, you need
the PIN2 code.
Call divert
Press , and select
Call divert.
Call divert allows you to divert your incoming calls
to your voice mailbox or another phone number. For
details, contact your service provider.
Select which calls you want to divert and the desired
diverting option. Set the option on (Activate) or off
(Cancel), or check whether the option is activated
(Check status).
100
selectLine 2 and have not
selectDisable if supported by
Tools Settings Phone
> >
Several diverting options can be active at the same
time. When all calls are diverted,
the standby mode.
Call barring and call diverting cannot be active at
the same time.

Network settings

is
Press , and select
Network.
Your device can automatically switch between the
GSM and UMTS networks. The GSM network is
indicated with in the standby mode. The UMTS
network is indicated with
Network mode
●
If you select Dual
or UMTS network automatically, according to the
network parameters and the roaming
agreements between the wireless service
>
providers. Contact your network service provider
for more details. This option is shown only if
supported by the wireless service provider.
Operator selection
●
the device to search for and select one of the
available networks,
the network from a list. If the connection to the
manually selected network is lost, the device
sounds an error tone and asks you to reselect a
network. The selected network must have a
is shown in
Tools Settings Phone
> >
.
— Select which network to use.
mode, the device uses the GSM
— SelectAutomatic to set
orManual to manually select
>