Storing The Tire Sealant And; Tire Changing - Chevrolet 2015 Cruze Owner's Manual

10-74 Vehicle Care
Storing the Tire Sealant
and Compressor Kit
(Diesel)
The tire sealant and compressor kit
is located in the trunk in a storage
compartment on the driver side of
the vehicle.
To remove the kit:
1. Open the trunk. See Trunk on
page 2-14.
2. Turn the wing nut
counterclockwise to remove it.
3. Remove the tire sealant and
compressor kit from the storage
compartment.
4. Remove the tire sealant and
compressor kit from the bag.
To store the inflator kit, reverse the
steps.

Tire Changing

Removing the Spare Tire and
Tools
To access the spare tire and tools:
1. Retainer Nut
2. Tool Bag Tether
3. Tool Bag
4. Spare Tire
1. Open the trunk. See Trunk on
page 2-14.
2. Lift the load floor.
3. Turn the retainer nut (1)
counterclockwise to remove it.
Then remove the tool bag
tether (2) from the stow rod, the
tool bag (3) containing the wheel
wrench and wheel blocks, and
the spare tire (4).
4. Remove the jack, jack handle
extension, and two-piece
wrench, if equipped.