Table of Contents
Advertisement
ES
EN
Energy saving
Evoke Mio is designed and manufactured to minimise power consumption when the
unit is switched on and to use less than 1 Watt in standby. One way this low power
consumption is enabled is by not collecting and storing Intellitext messages when the
unit is in standby. You can override this option by switching off energy saving mode,
but this will increase standby power consumption. Two options are available:
Energy saving On (the default setting)
Updates the Intellitext data when you tune to a station that broadcasts Intellitext.
Intellitext data is not collected in standby.
Energy saving Off
Collects Intellitext data in standby from the last station you tuned to with Intellitext,
which increases standby power consumption.
Note: When you have a ChargePAK E1 fitted (see following page) the radio will switch
off when you press the Standby button and not enter standby, as long as it is not
connected to mains power.
Software Updates
Software updates for your Evoke Mio may be made available in the future. If you
register your product and include a valid e-mail address you will receive notification of
software updates (register at www.pure.com/register). Alternatively, visit
http://support.pure.com at any time to check for available software updates.
To update your software
Connect your radio to your PC using a suitable A-to-mini B type USB cable. Follow
the instructions provided with the software download at http://support.pure.com
Note: USB update requires a PC running Windows XP (32 bit), Windows Vista (32 bit)
or Windows 7 (32 bit) with internet access and a suitable USB cable (not included).
64 bit Windows systems and Mac OS systems are not currently supported.
15
Hide quick links:
Advertisement
Table of Contents
