Kia 2014 Sportage Owner's Manual page 139

Features of your vehicle
6.Return to the vehicle and firmly
press and release the programmed
HomeLink ® button up to three
times. The rolling code equipped
device should now recognize the
®
HomeLink signal and activate
®
when the HomeLink
pressed. The remaining two but-
tons may now be programmed if
this has not previously been done.
Refer to the "Programming" portion
of this text.
4 52
Operating HomeLink
To operate, simply press the pro-
grammed
Activation will now occur for the
trained product (garage door, securi-
ty system, entry door lock, estate
button is
gate, or home or office lighting). For
convenience, the hand-held trans-
mitter of the device may also be used
at any time. The HomeLink
Controls System (once programmed)
or the original hand-held transmitter
may be used to activate the device
(e.g. garage door, entry door lock,
etc.). In the event that there are still
programming difficulties, contact
HomeLink ® at 1-800-355-3515 or on
the internet at www.homelink
®
HomeLink ® button.
® Wireless
Erasing programmed HomeLink
buttons
To erase the three programmed but-
tons (individual buttons cannot be
erased):
® .com.
• Press and hold the left and center
HomeLink
learning) mode and can be pro-
grammed at any time.
Flashing
OHD046306N
buttons simultaneously, until the
indicator light begins to flash
(approximately 20 seconds).
Release both buttons. Do not hold
for longer than 30 seconds.
®
is now in the train (or
®