Advertisement
Available languages
Available languages
-
Each MACRO can consist of a maximum of 22 keystrokes.
-
To include a function from a particular screen in a mode,
use the SCROLL key.
-
Make sure that you program a Macro on a spare key that you don't use in
any mode.
-
Once you program a Macro on a specific key, the sequence will work
regardless of the mode (TV, SAT, DVD, VCR, PVR, CD, AUD or LIGHT) you are
using (if the label is the same as the label on which the Macro was
programmed). This means that the function picked on that specific key
will be sacrificed.
-
To avoid accidental recordings with the KAMELEON 8, you must press the
RECORD key twice to begin recording. Please note that if you assign a
Macro or Shifted Macro to the RECORD key, this will deactivate the double
key press. Therefore we recommend not to assign a Macro to this key.
-
If you had to hold down a key for a few seconds on the original remote
control to get a function, this function may not work in a macro on your
KAMELEON 8 remote.
-
Keys such as (TV) menu, (TV) guide etc. will not change screen when pressed
during Macro programming.
-
Upon changing the batteries your Macro(s) will be retained.
-
If you program a Macro on a key, the original function will become shifted
(excluding POWER, CH+/- and VOL+/- keys). Press MAGIC then the key to
access it. If you place a Macro on a digit key, access the original function by
pressing MAGIC twice and then the digit key.
-
You can replace a Macro by placing another Macro on top.
KAMELEON 8
that switches off your TV, VCR and SAT
KAMELEON 8
KAMELEON 8
WWW.ONEFORALL.COM
Advertisement
