Sanyo SPW-U253GH56 Service Manual page 89

(G) Confirm and change the indoor unit address
The purpose of the above function is to let you confirm the indoor unit address
after the auto. address operation, and change the indoor unit address if it is
needed.
a Press the TEST / CHK and
seconds.
AIR FLOW
UNIT
R.C.
FLAP
TIMER SET
SET CL
b Select the R.C. No. which you want to change with the UNIT (up) or
FLAP (down) buttons.
c Press the SET button (to confirm the R.C. No.).
The smallest registered indoor No. and the selected R.C. No. will be
displayed.
AIR FLOW
UNIT
UNIT No.
R.C.
FLAP
TIMER SET
SET CL
d Select the indoor No. which you want to change with UNIT button. Once in this mode,
the fan motor of selected indoor unit will turn on and let you confirm the indoor
unit address.
( ) buttons at the same time for more than 4
MODE
SET TEMP.
CODE No.
FAN SPEED
SETTING
SET DATA
ON •
OFF •
TEST / CHK
0362_M_I
MODE
No.
SET TEMP.
CODE No.
FAN SPEED
SETTING
SET DATA
ON •
OFF •
TEST / CHK
0363_M_I
– 89 –
4. Service procedures
Ex:
R.C. No. 3 is selected.
Indoor No. 2 is the smallest indoor No. of
the R.C. No. 3.
4
SM830035