1. Precautions 1. Precautions 1-1. Safety Precautions Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. 1-1-1. Warnings For continued safety, do not attempt to modify the circuit board. Disconnect the AC power and DC power jack before servicing.
1. Precautions 1-2. Servicing Precautions WARNING: An electrolytic capacitor installed with the wrong polarity might explode. Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of this manual. Note: If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions, always follow the safety precautions.
1. Precautions 1-4. Installation Precautions For safety reasons, more than a people are required for carrying the product. Keep the power cord away from any heat emitting devices, as a melted covering may cause fire or electric shock. Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature may cause fire.
2. Product specifications 2. Product specifications 2-1. Model Comparison Model Inch LD450 Front View Detail View Front Color ToC RED Black With Stand 660.7 x 222.1 x 482.8 (mm) / 26 x 8.7 x 19 (inch) 26" Without Stand 660.7 x 78.6 x 435 (mm) / 26 x 3.1 x 17.1 (inch) Dimensions W x D x H With Stand 795.5 x 251.7 x 571.1 (mm) / 31.3 x 9.9 x 22.5 (inch)
2. Product specifications 2-4. Detail Factory Option If you replace the main board with new one, please change the factory option as well. The options you must change ※ are “Type”. Model Name LN26D450G1G LN32D450G1G LN26D450G1M LN32D450G1M Vendor Panel CODE...
USB Compatibility problem. Before connecting your device to The TV, Please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. Do not disconnect The USB device while it is loading.
2. Product specifications 2-5-2 Supported Formats Supported Subtitle Formats Name File extension Format MPEG-4 time-based text .ttxt text SAMI .smi HTML SubRip .srt string-based SubViewer .sub string-based Micro DVD .sub or .txt string-based Supported Video Formats Frame rate Bit rate File Container...
Below 1280 x 720: 60 frame max channel or lossless audio. Above 1280 x 720: 30 frame max WMA sampling rate 22050 Hz mono is not supported. H.263 is not supported. GMC 2 is not support. Only Samsung Techwin MJEPG is supported. 2-10...
2. Product specifications 2-6. Accessories Product Description Code. No Remark Remote Control AA59-00486A Samsung Electronics Power Cord 3903-000601 Service center Owner’s Instructions BN68-03375A Warranty Card / AA68-03242L Safety Guide Manual AA68-03533A (Not available in all locations) 2-11...
3. Disassembly and Reassembly 3. Disassembly and Reassembly This section of the service manual describes the disassembly and reassembly procedures for the LCD TV. WARNING: This LCD TV contains electrostatically sensitive devices. Use caution when handling these components. 3-1. Disassembly and Reassembly Cautions: 1.
Page 19
3. Disassembly and Reassembly Description Inch Picture Description Screws Remove stand. 26" 32" Remove the screws of rear-cover. 26": 7 EA 32": 8 EA 6002-001294 26" 32"...
Page 20
3. Disassembly and Reassembly Description Inch Picture Description Screws Lift up the rear-cover. Remove the left and right speaker. Remove the screws of main board. 26", 32": 4 EA Remove the screws of IP board. 26", 32": 5 EA 6001-002284 26"...
Page 21
3. Disassembly and Reassembly Description Inch Picture Description Screws Remove the screws of stand link. 26": 2 EA 32": 5 EA Remove the screws of panel and front. 6001-002284 26" / 32": 2 EA. 26" screw is hidden under speaker ...
3. Disassembly and Reassembly 3-2. Stand Assembly Rear cover screws Stand Guide screws Inch Rear cover screws Stand Guide screws 26" 6002-001294 3 EA 32" 6002-001294 4 EA 6002-001294 4 EA Screw Size Code No. A (mm) B (mm) C (mm) Q'ty 26": 10 EA 6002-001294...
4. Troubleshooting 4. Troubleshooting 4-1. Troubleshooting Check the various cable connections first. Check to see if there is a burnt or damaged cable. Check to see if there is a disconnected or loose cable connection. Check to see if the cables are connected according to the connection diagram. Check the power input to the Main Board.
4. Troubleshooting 4-1-2. No Power The LEDs on the front panel do not work when connecting the power cord. Symptom The SMPS relay does not work when connecting the power cord. The units appears to be dead. The IP relay or the LEDs on the front panel does not work when connecting the power cord if the cables are improperly connected or the Main Board or SMPS is not functioning.
Page 25
4. Troubleshooting Check a other function (No picture part). Diagnostics A power is supplied to set? Replace a LCD Panel. Caution Make sure to disconnect the power before working on the IP board. Location (Main) - TOP BD1012 L201 BD209 IC202 (#5) BD1003 BD1002...
Page 26
4. Troubleshooting 4-1-3. No Video_Analog PC signal Symptom Audio is normal but no picture is displayed on the screen. Check the PC source. Major Check the Arsenal, Check the Chelsea. checkpoints This may happen when the LVDS Cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 28
4. Troubleshooting WAVEFORMS PC input (V-sink, H-sink, R / G / B) LVDS output...
Page 29
4. Troubleshooting 4-1-4. No video_HDMI1, 2 - Digital signal Symptom Audio is normal but no picture is displayed on the screen. Check the HDMI source. Major Check the HDMI switch, Check the Chelsea. checkpoints This may happen when the LVDS Cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 32
4. Troubleshooting 4-1-5. No Video_Tuner - CVBS Symptom Audio is normal but no picture is displayed on the screen. Check the Tuner CVBS source. Major Check the Tuner, Check the Chelsea. checkpoints This may happen when the LVDS Cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 35
4. Troubleshooting 4-1-6. No Video_Tuner DTV Symptom Audio is normal but no picture is displayed on the screen. Check the DTV source. Major Check the Tuner, Check the Chelsea. checkpoints This may happen when the LVDS Cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 38
4. Troubleshooting 4-1-7. No Video_Video CVBS Symptom Audio is normal but no picture is displayed on the screen. Check the Video CVBS source. Major Check the Chelsea. checkpoints This may happen when the LVDS Cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 41
4. Troubleshooting 4-1-8. No Video_Component Symptom Audio is normal but no picture is displayed on the screen. Check the Component source. Major Check the chelsea. checkpoints This may happen when the LVDS Cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
4. Troubleshooting 4-1-9. No Sound Symptom Video is normal but there is no sound. When the speaker connectors are disconnected or damaged. Major When the sound processing part of the Main Board is not functioning. checkpoints Speaker defect. Check the source and check the connection of Input the sound source properly.
4. Troubleshooting 4-2. Function Control the sensitivity of function key is available in Factory mode. Option Sub Option Key Sensitivity Control Function Key Expert ADC / WB Advanced Key Sensitivity Default: 1 ~ 254 and Not Used Raising this value, the sensitivity decreases Not Used: Not use sensitivity, use Function Default value Function Key Default:...
4. Troubleshooting 4-3. Factory Mode Adjustments 4-3-1. Entering Factory Mode If you do not have Factory remote- control Power OFF MUTE Power ON If you have Factory remote-control INFO Factory If you don’t have Factory remote control, can’t access the factory mode. T - MST4IBRC - XXX Option T - MST4IBRS - XXX...
Page 49
4. Troubleshooting Watchdog ON / OFF WD Count 0 ~ 255 Dimm Type fixed Lvds Format JEIDA JEIDA / VESA / 19INCH Language_Arbic KR / US / EU Info+fatory TOOLS Support 0 ~ 255 Info+fatory LNA Support 0 ~ 255 Info+fatory MediaPlay DB On whth 5MB...
Page 51
ON / OFF S-Micom Upgrade ON / OFF Hotel Option Hotel Mode ON / OFF Samsung / 2M / Locatel / VDA / VDA-SAcentic / Premiere / Sustinere / Quadriga / ETV / Ibahn / Magilink / SI Vender Samsung Info+fatory...
Page 52
4. Troubleshooting Channel Type ATV / DTV / CATV / CDTV Power On Volume 0 ~ 100 Min Volume 0 ~ 100 Max Volume 0 ~ 100 Panel Button Lock Unlock Unlock / Lock / OnlyPower TV / AV / Comp / PC / HDMI1 / HDMI2 / Power On Source HDMI3 / HDMI4 Shop Option...
Page 54
4. Troubleshooting HDMI ROBIN ON / OFF Info+fatory HDMI Callback ON / OFF Info+fatory HDMI CTS Thld 0 ~ 15 Info+fatory HDMI CTS Cnt1 0 ~ 15 Info+fatory TMDS_EQ2_Boost 0 ~ 7 Info+fatory TMDS_EQ2_Gain 0 ~ 3 Info+fatory TMDS_PLL_Loop 0 ~ 3 Info+fatory TMDS_CPREG_BLEED 0 ~ 1...
Page 55
4. Troubleshooting Factory Menu Name Data Range Remark Test Pattern OFF / White / Grey / Black / Red / Green Pattern Sel / Blue Logic Pattern Sel … fixed Logic Level Sel … fixed Panel Auto Setting Success Info+fatory Panel Display Time 22Hr Logic Usb D / L...
Page 56
4. Troubleshooting Master Lock_1 A_Modulation_1 A_Code Rate_1 A_Timer InterLeave_1 A_Segments Num_1 A_Ber_1 B_Modulation_! B_Code Rate_1 B_Timer InterLeave_1 B_Segments Num_1 B_BER_1 C_Modulation_1 C_Code Rate_1 C_Timer InterLeave_1 C_Segments Num_1 C_BER_1 T-ConUsbDownload Failire ADC / WB Factory Menu Name Data Range Remark AV Calibration Success Success / Failure Comp Calibration...
4. Troubleshooting 4-4. White Balance - Calibration 4-4-1. White Balance -Calibration ADC / WB AV Calibration Comp Calibration PC Calibration HDMI Calibration 4-4-2. Service Adjustment You must perform Calibration in the Lattice Pattern before adjusting the White Balance. Color Calibration / Adjust spec Source: HDMI Setting Mode: 1280 x 720 @ 60 Hz Pattern: Pattern #24 (Chess Pattern)
Page 60
4. Troubleshooting Method of Color Calibration (Component) Apply the 720p Lattice (N0. 6) pattern signal to the Component IN 1 port. Press the Source button to switch to “Component 1” mode. Enter Service mode. Select the “ADC” menu. Select the “Comp Calibration” menu. In “Comp Calibration Off”...
Page 61
4. Troubleshooting LN26D450G1G / LN26D450G1M Adjustment Coordinate CA - 210 P - Mode Y (Luminance) T (K) + MPCD [Dynamic Cool1] 49 fL H / L 12,000 (+ / -0) (Sub_CT: 128 Fix) HDMI Comp 3.6 f L L / L...
4. Troubleshooting 4-5. Servicing Information To RS232C control Port: COM# (Serial) Bit rate: 38400 Data Bit: 8 bit Parity: None Stop Bits: 1 Flow Control: None Description of RS232C Pin# Name Full Name Carrier Detect Received Data Transmitted Data Data Terminal Ready Signal Ground Data Set Ready Request To Send...
4. Troubleshooting 4-6. Software Upgrade Software Upgrade can be performed by downloading the latest firmware from samsung.com to a USB memory device. Current Version - the software already installed in the TV. Note Software is represented as ‘Year / Month / Day_Version’.
5. Wiring Diagram 5-3. Connector Functions Connector Functions CN201 ↔ IP CN801 Supply main power and dimming signal from IP board to Main Board. CN1601_FHD / CN1602_HD ↔ T-Con CNF1 The LVDS signal transfered from Main Board to Panel. CNI802 ↔ T-BALANCE Board Supply power from IP board to Driver Board.