Fujitsu LifeBook S751 Bios Manual page 23

Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
Info
Drive0:
Set Master Password
Set User Password
Drive2:
Set Master Password
Set User Password
Drive4:
Set Master Password
Set User Password
Drive5:
Set Master Password
Set User Password
Password Entry on Boot:
F1 Help
ESC Exit
Table 16: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Options
Drive[X]*:
___
Set Master
___
Password
Set User Password
___
Password Entry on Disabled

Boot:
Enabled

* "Drive[X]" references apply to all drives listed on this screen.
Phoenix SecureCore(tm) Tiano Setup
System Advanced
Hard Disk Security
Clear
[Enter]
[Enter]
Not Available
[Enter]
[Enter]
Not Available
[Enter]
[Enter]
Not Available
[Enter]
[Enter]
[Enabled]
Select Item -/Space
Select Menu Enter
Figure 16. Hard Disk Security Submenu
Default Description
Clear Display-only. Default is Clear. When the Drive[X] Password has been set, the
field changes to Set. When this password is set, the primary hard disk drive can-
not be used in another system unless the password is entered.
[Enter] Sets, changes or cancels the Drive[X] Master Password. The Drive[X] Master
Password may be up to seven characters long and must include only letters or
numbers (no symbols). Passwords are NOT case-sensitive. When a Drive[X]
Password is set, it must be used to access the hard drive if it is used in another
system. Note that the password will not take effect until the system has been
rebooted. The Master Password does not provide security; it simply allows the
user to set the User Password, which provides true security.
[Enter] Sets, changes or cancels the Drive[X] User Password. The Drive[X] User Pass-
word may be up to seven characters long and must include only letters or num-
bers (no symbols). Passwords are NOT case-sensitive. When a Drive[X]
Password is set, it must be used to access the hard drive if it is used in another
system. Note that the password will not take effect until the system has been
rebooted.
[Enabled] When set to disabled, entry of a Hard Disk Password is not required before OS
boot. (The hard disk is still password-protected without password entry.)
Security Boot Exit
Configure hard disk
security feature.
Change Values
Select  Sub-Menu
S e c u r i t y M e n u
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
23