Diagnosis; Disassembly - Pioneer CDX-M2086ZBM Service Manual

7.2 DIAGNOSIS

7.2.1 DISASSEMBLY

- Removing the Upper Case
1.Remove the eight screws and then remove the upper case.
- Removing the Extension PCB
1.Remove the two screws.
2. Stretch the claw indicated by arrow and then remove
the extension PCB.
Note : Before disassembling the CD mech module, turn the spring holder so that the spring is positioned
horizontally. After reassembling, return the spring to the vertical position.
CDX-M2086ZBM
EXTENSION PCB
43