Additional Memory Module - Toshiba Satellite A665 User Manual

Additional memory module

Please also refer to Chapter 3,
information on installing and removing memory modules.
Problem
If there is a memory
malfunction, the
Power indicator will
repeatedly flash (on
for 0.5 seconds, off for
0.5 seconds) in the
following patterns;
If there is an error in
only Slot A: amber
twice, then white
once.
If there is an error in
only Slot B: amber
once, then white
twice.
If there are errors in
both Slot A and Slot
B: amber twice, then
white twice.
An error will occur if a
memory module is
inserted into Slot B
while no memory
module is inserted in
Slot A.
User's Manual
Hardware, Utilities and
Procedure
In the event the Power indicator flashes when
the computer is turned on, you should first check
that the installed memory module(s) are
compatible with the computer. If there is an error
with a compatible memory module, there is a
possibility the memory module is damaged.
If you determine that an incompatible module has
been installed, you should follow the steps as
detailed below:
1. Turn off the computer.
2. Disconnect the AC adaptor and all peripheral
devices.
3. Remove the battery pack.
4. Remove the incompatible memory module.
5. Install the battery and/or connect the AC
adaptor.
6. Turn on the computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Remove the memory module from Slot B and
insert it into Slot A.
Satellite A660/A665
Options, for further
8-19