Selecting A Shooting Mode - Hitachi DZ-BD7H Quick Operation

Selecting a shooting
mode
During recording pause, press
1
the menu button.
"Camera Functions Setup"
2
"Program AE"
mode.
Press the confirmation button
to confirm, then the menu
button to end.
The selected shooting mode
3
(other than Auto) appears in the
LCD monitor.
• The shooting mode is retained
in memory even when the
power is turned off.
Note
When shooting in dark places,
after-images may appear if the
subject is moving or if camera
shake occurs. Use a tripod for best
results.
You can reset the following manually
adjusted shooting settings to their
defaults with the press of a single
a shooting
button.
Focus
Exposure
BLC (Backlight)
Program AE (shooting mode)
White Balance
EIS (Electronic Image
Stabilizer)
Microphone Filter
HDD BD-RE BD-R RAM -RW (VR)
Restoring all the
Shooting Settings to
Default (Full Auto)
Function
During recording pause or
recording, press the Full Auto
button.
1
"FULL AUTO" appears in the
LCD monitor for a while and the
settings are reset to their default
settings.
-RW (VF) R CARD
Default
Auto
Auto
Off
Auto
Auto
On
Off
Full Auto
button