Attaching The Data Memory Back; Inserting The Smartmedia Card - Minolta data memory back dm9 Instruction Manual

DM9E 12/15/98 11:37 AM Page 10

ATTACHING THE DATA MEMORY BACK

• The camera supplies power to the DM-9 when it is mounted on the
camera. The DM-9's lithium battery supplies power to the data
memory back when the back is open or when the DM-9 is not
mounted on the camera.
• Data will be stored in the camera's data memory function and
imprinting will not be possible if the lithium battery is not installed in
the DM-9.
Turn the main switch to LOCK, then open the back of
the camera...
10
1. Push the release pin
down , then remove the
camera back.
2. Insert the data memory
back's lower hinge pin
into the camera's lower
eyelet .
3. Push the release pin
down , align the upper
hinge pin with the eyelet
, then release the
release pin.
4. Close the back of the
camera.

INSERTING THE SmartMedia CARD

The 2MB 3.3V SmartMedia card provided with the Data
Memory Back has already been properly formatted for use with
the DM-9. See page 28 to format cards not included with this
unit.
Before inserting a SmartMedia card...
Mount DM-9 on the camera and turn the camera's
main switch to LOCK.
1. Open the card-slot door.
2. Remove the card from it's
anti-static case.
• Don't touch the card's contacts.
• Save the anti-static case for future
storage of the SmartMedia card.
3. Insert the card into the
card slot, contact-side
down, then close the
card-slot door
• appears in the data
panel if the card was correctly
inserted.
• blinks in the data
panel if the card was inserted
incorrectly. Remove and
correctly reinsert the card.
• If no display appears, press
any button on the control
panel.
11