Radio; M), Preset Station Setting, Fm - Panasonic CQ-DFX983U Operating Instructions Manual

Radio

E
N
G
L
I
S
Radio Mode
1
H
Press [SOURCE] to change to the radio mode.
5
[D M] (direct memory)
•
Band
2
Press [BAND].
FM1 FM2
AM FM3
Tuning
3
[$]: Up
[%]: Down
Press and hold [%] or [$] for more than
0.5 seconds, then release.
Seeking will start.
Direct Memory (D M)
•
Your favorite radio station can be memorized in [D
Default: FM 87.9 MHz
∫ Memorize
1
Select a band and frequency.
2
Press and hold [D M] for more than 2 seconds.
•
Frequency blinks once and is saved in the
memory.
Note:
≥ Existing saved station is overwritten with new sta-
tion after this procedure above.
20
CQ-DFX983/DF903U
Radio mode display
FM stereo indicator
["] [#] (preset station)
M] (direct memory).
•
∫ Recalling the Direct Memory
Press [D M].
•
Press [D M] again to cancel.
•
Note:
≥ You can recall the direct memory even when the
power is off.
Caution:
≥ To ensure safety, never attempt to preset stations while you are driving.
Preset Station Setting
Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
Manual Preset Memory
Manually save a station in the preset memory.
1 Select a band and frequency. (previous page)
2
Press and hold ["] or [#] for more than
2 seconds until the preset number blinks.
3
Press ["] or [#] to select a preset number
(1j6).
4
Press and hold ["] or [#] for more than
2 seconds to memorize.
≥ The display blinks once, and a receiving sta-
tion is saved in the memory.
Preset number
Note:
≥ Frequency setting can be performed even after se-
lecting a preset number.
≥ To cancel preset write, press [DISP] (display).
1
Select a band and frequency. (previous
page)
2
Press and hold [1] to [6] for more than
2 seconds to memorize.
Note:
≥ Existing saved stations are overwritten with new stations after this procedure above.
Preset Station Calling
1
Select a band. (previous page)
2
Press ["] or [#].
(Press [1] to [6] on the remote control unit.)
Auto Preset Memory (APM)
Automatically save stations with good reception in
the preset memory.
1 Select a band. (previous page)
2
Press and hold [APM] for more than 2 sec-
onds.
≥ The 6 stations with good reception will be auto-
matically saved in the memory under preset num-
ber 1 to 6.
≥ Once set, the preset stations are sequentially
scanned for 5 seconds each. (scanning)
POWER MENU
[SOURCE]
SOURCE SEL
VOL
NUMBER
#
MUTE
1 2 3
[1] to [6]
RAND SCAN REP
4 5 6
(preset station)
[%] [$]
7 8 9
(tuning)
["] [#]
6 5
[BAND]
0
BAND DISP
(preset station)
(auto preset SET
memory)
Car Audio
Note:
≥ When pressing [MENU] in radio mode, the follow-
ing display appears.
This is because radio mode does not have any
menu settings.
CQ-DFX983/DF903U
E
N
G
L
I
S
H
6
21